Click for Callaway, Virginia Forecast

Saturday, January 08, 2005

I should mention that after I installed the new grips, I connected the wiring to the switch and the switch to the power source, before I installed the fairing and put the rest of the bike back together. I had an analog voltmeter attached to the dash (you can see it in a few pictures). I no longer use this voltmeter, since installing the digital voltmeter. I simply used the power lead to the analog voltmeter as it is on a switched circuit. Make sure you install the heated grips to a "switched circuit", otherwise if you forget and leave them on, you will come back to a dead battery. Posted by Hello

Comments: Post a Comment

<< Home

This page is powered by Blogger. Isn't yours?